Công tắc cảm ứng hiện diện THEBEN ECO-IR 360C NT

Công tắc cảm ứng hiện diện THEBEN ECO-IR 360C NT 

– Tắt/bật đèn ống và ĐHKK theo sự hiện diện và độ sáng (tự nhiên)
– Gắn trần chìm trong nhà (IP40).
– Tầm quét 8x8m/11x11m (ngồi/đi).
– Kênh 1: xung (0,5s), 10s -20 min (tắt trễ), tự điều chỉnh.
– Kênh 2: 10s~120min/0s~10min (tắt/bật trễ).
– Nối với cảm biến hoặc công tắc ngoài để điều khiển thủ công.
– Hoạt động song song.
– Chế độ tự động và bán tự động.
– Hạn dòng đối với chấn lưu.
– Chế độ phòng/hành lang
Features
– Presence detector (PIR)
– Square detection area
– Genuine daylight measurement
– Light switch output (relay, 230 V)
– Presence switch output (relay, potential-free)
– Automatic control of lighting and HVAC as well as room monitoring function
– Lighting control with light threshold value and self-learning swich-off delay
– Choice of fully or semi automatic operation
– Sensor or switch options for manual switching
– Pulse function for staircase time switch
– Inrush current limitation for EB
– HVAC control with switch-on and swich-off delay
– Room monitoring with selective movement detection
– Fully or semi-automatic: In ‘Fully automatic’ mode, the lighting switches on and off automatically according to presence and light. In ‘Semi-automatic’ mode, it must be switched on manually and it switches off automatically
– Manual override: The lighting can be manually switched on or off at any time via sensors or switches
– Room/corridor sensor function: In the ‘corridor’ setting, the detector functions as a staircase time switch and it cannot be switched off manually
– The pulse function is for controlling a staircase time switch
– The inrush current limitation makes the presence detector particularly suitable for switching electronic ballasts (EBs)
– The presence detector has ‘Genuine daylight measurement’ and is only suitable for switching fluorescent lamps (FL/PL)
– Presence switch contact for HVAC control: The switching behaviour of the potential-free contact is only controlled by presence
– The switch-on delay prevents instantaneous switch on. The contact only closes on completion of the switch-on delay
– The sensitivity of the presence switch output is reduced in the ‘monitoring’ position. The contact indicates the presence of people with a high degree of certainty
– Master/slave parallel switching: Up to ten detectors can be connected with each other to extend the detection area. The master switches the load. All other detectors merely provide presence information as slaves
– Device can be connected as master or slave
– Test operation mode checks the detection area and installation
– A maximum of 10 detectors can be switched at the same time
– The switching behaviour of the presence detector is controlled by presence and light
– The self-learning switch-off delay adjusts to occupants’ behaviour
– The square detection area allows accurate and simple planning
– Hãng sản xuất THEBEN của Đức.
– Bảo hành: 1 năm